Ford Corsar Repair Manual page 377

TROUBLE DIAGNOSES
1
KA24EI
Electrical Components Inspection (Cont'd)
E.C.C.S. RELAY
Check continuity between terminals
@
and
0.
Condition Continuity
12V direct current supply
between terminals
@
and
@
No supply
CRANK ANGLE SENSOR
1.
Remove distributor from engine. (crank angle sensor har-
ness connector is connected.)
2. Turn ignition switch "ON".
3.
Rotate crank angle sensor shaft slowly and check voltage
between terminals@, @ and ground.
Voltage fluctuates between 5V and OV.
4. Visually check rotor plate for damage or dust.
AIR FLOW METER
m Visually check hot wire air passage for dust.
ENGINE TEMPERATURE SENSOR
Check engine temperature sensor resistance.
Temperature "C ("F)
20 (68)
80 (176)
Resistance kR
2.1
-
2.9
0.30
-
0.33