Ford Corsar Repair Manual page 689

REAR DISC BRAKE (CLSH)
-
Caliper
Pad Replacement
1. Remove parking cable stay fixing bolt, pin bolt and lock
spring. Then remove pad retainers, pads and shims.
CAUTION:
When cylinder body is swung up, do not depress brake pedal
because piston will pop out.
2. When installing pads, retract piston into cylinder body by turn-
ing piston clockwise with service tool.
CAUTION:
Be careful not to damage piston boot or get oil on rotor.
Always replace shims when replacing pads.
Removal and Installation
Dissconnect parking brake cable and brake hose, then remove
caliper assembly.
Disassembly
1. Remove piston by turning it counterclockwise with service
tool until tool hits caliper body. Complete the removal using
suitable tool.
r
1
2. Pry off rlng A from piston w ~ t h suitable pliers and remove
adjusting nut.