Ford Corsar Repair Manual page 561

REPAIR FOR COMPONENT PARTS
Th~ckness
F a c ~ n g
Core plate
S A T 8 4 5 A
Low & Reverse Brake (Cont'd)
INSPECTION
Examine low and reverse brake for damaged clutch drive
plate facing and worn snap ring.
Check drive plate facing for wear or damage; if necessary,
replace.
Drive plate thickness:
Standard
2.0 mm (0.079 in)
Allowable limit
1.8 mm (0.071 in)
Specified clearance between retaining plate
and snap ring:
Standard
2.2
-
2.6 mm (0.087
-
0.102 in)
Allowable limit
3.6 mm (0.142 in)