Rear Brake Caliper - Honda CRF450R 2009 Service Manual

INSTALLATION
Install the brake pads (page 16-11).
~~~;~!~
Install the brake hose eyelet with the brake hose oil boll
and new sealing washers.
Push the brake hose eyelet joint against the stopper,
then tighten the brake hose oil boll to the specified
torque.
TORQUE : 34 N' m (3.5 kgf'm, 25 IbHt )
After
'12' Install the brake disc cover (page 14-17).
Fill the reservoir to the upper level and bleed the
hydraulic system (page 16-8).
REAR BRAKE CALIPER
REMOVAL
Drain the rear brake hydraulic system (page 16-7).
Remove the brake pads (page 16-13).
Remove the bolts and rear brake caliper guard.
Loosen the brake hose oil bolt.
Remove the rear wheel (page 15-8).
HYDRAULIC BRAKE
Remove the brake caliperlbracket assembly to the slide
~~~~~~~ C~A;LI;P; E ; R I : B: R A : : C : K : E : T : A : S ~ S ~ E ~ M ~ B ~ L
y 2
rail of the swingarm.
Remove the brake hose oil bolt, sealing washers and
brake hose eyelet.
'09 shOwn:
SEALING
16-25