Front Brake Caliper Disassembly/Assembly; Front Brake Caliper Inspection - Honda CRF1000 Shop Manual

dummyhead dummyhead
DISASSEMBLY/ASSEMBLY
• Be careful not to damage each piston.
• Do not use high pressure air or bring the nozzle too
close to the inlet.
• Mark the pistons to ensure correct reassembly.
• Be careful not to damage the piston sliding surface.
• Install each piston seal, dust seal and caliper piston
in their proper locations.
• Piston A: larger O.D.
• Piston B: smaller O.D.
PISTON SEAL A
PISTON SEAL B
DUST SEAL B
INSPECTION
Check the following parts for scoring, scratches,
deterioration, or damage.
– Caliper cylinders
– Caliper pistons
Measure the parts according to HYDRAULIC BRAKE
SPECIFICATIONS (page 1-10).
Replace any part if it is out of service limit.
DUST SEAL A
PISTON A
(larger O.D.)
BRAKE
PADS
DUST SEAL B
PISTON B
(smaller O.D.)
BLEED VALVE
5.4 N·m (0.6 kgf·m, 4.0 lbf·ft)
PAD SPRING
DUST SEAL A
PISTON SEAL A
PISTON SEAL B
HYDRAULIC BRAKE
19-19