H3C s3100 series Command Manual page 9

mst-region
mtlk-group
null
peer-key-code
peer-public-key
pki-domain
pki-entity
poe-profile
qos-profile
radius-template
shell
smlk-group
ssl-client-policy
ssl-server-policy
system
user-interface
vlan
vlan-interface
command: Command for which the level is to be set.
Description
Use the command-privilege level command to set the level of a specified command in a specified
view.
Use the undo command-privilege view command to restore the default.
Commands fall into four levels: visit (level 0), monitor (level 1), system (level 2), and manage (level 3).
The administrator can change the level of a command as required. For example, the administrator can
change a command from a higher level to a lower level so that the lower level users can use the
command.
The default levels of commands are described in the following table:
Table 1-2 Default levels of commands
Level
0 Visit level
1 Monitor level
CLI view
Name
Commands used to diagnose network, such as ping, tracert, and
telnet commands.
Commands used to maintain the system and diagnose service fault,
such as debugging, terminal and reset commands.
MST region view
Monitor link group view, which is supported by only the
S3100-EI series
NULL interface view
Public key editing view
Public key view
PKI domain view
PKI entity view
PoE profile view, which is supported by only the
S3100-TP-PWR-EI series
QoS profile view, which is supported by only the S3100-EI
series
RADIUS scheme view
User view
Smart link group view, which is supported by only the
S3100-EI series
SSL client policy view
SSL server policy view
System view
User interface view
VLAN view
VLAN interface view
Command
1-2
Description