Reset Dot1X Guest-Vlan; Reset Dot1X Statistics - H3C MSR Series Command Reference Manual

Examples
# Enable the unicast trigger feature on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x unicast-trigger
Related commands
display dot1x
dot1x multicast-trigger
dot1x retry
dot1x timer

reset dot1x guest-vlan

Use reset dot1x guest-vlan to remove users from the 802.1X guest VLAN on a port.
Syntax
reset dot1x guest-vlan interface interface-type interface-number [ mac-address mac-address ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
mac-address mac-address: Specifies the MAC address of an 802.1X user in the guest VLAN. If you
do not specify this option, the command removes all 802.1X users from the 802.1X guest VLAN on
the port.
Examples
# Remove the 802.1X user with MAC address 1-1-1 from the 802.1X guest VLAN on port
GigabitEthernet 1/0/1.
<Sysname> reset dot1x guest-vlan interface gigabitethernet 1/0/1 mac-address 1-1-1
Related commands
dot1x guest-vlan

reset dot1x statistics

Use reset dot1x statistics to clear 802.1X statistics.
Syntax
Wireless devices:
reset dot1x statistics [ ap ap-name [ radio radio-id ] | interface interface-type interface-number
Wired devices:
reset dot1x statistics [ interface interface-type interface-number ]
Views
User view
187