Turn Signal Switch; Speed Sensor - Honda V65 MAGNA Shop Manual

V65MAGNA
SWITCHES
Remove the angle sensor (page 15-10).
Measure the resistance between the B/Y and the
G/W leads.
RESISTANCE: 10-19 k ohms
Check the resistance between the Wand G/W leads
turning the sensor arm slowly from the left
right. The resistance should increase
TURN SIGNAL SWITCH
Disconnect the cancel unit coupler.
Turn the turn signal switch to the left position
and connect a jumper wire to the B/Bk and Br/B
leads.
The turn signal switch should return to the neutral
position.
Perform the same test for the right turn position.
SPEED SENSOR
Disconnect the cancel unit coupler,
Check for continuity between the W/Bk and the
G lead terminals at the wire harness coupler while
turning the front wheel slowly.
RESISTANCE: 0
~
00
Alternately
Date of Issue: Dec, 1982
©
HONDA MOTOR CO., LTD.
331
21-
1