Fan Control Relay - Honda CBR125R Owner's Manual

COOLING SYSTEM

FAN CONTROL RELAY

INSPECTION
Remove the rear cowl (page 2-5).
Remove the fan control relay.
Connect a ohmmeter to the fan control relay con-
nector terminals.
Connect a 12 V battery to the fan control relay con-
nector terminals as shown.
There should be continuity only when 12 V battery
is connected.
If there is no continuity only when the 12 V battery
is connected, replace the fan control relay.
6-20
FAN CONTROL RELAY
FAN CONTROL RELAY
Bl/Bu
Bl/W
R/G Bu