Clear Ipv6 Dhcp Snooping Binding - Dell S6100 Configuration Manual

The following example shows how to clear the discard counters on an interface:
Dell> clear ip dhcp snooping source-address-validation discard-counters
interface TenGigE 1/1/1/1
The following example shows how to clear the discard counters on a port channel interface:
Dell> clear ip dhcp snooping source-address-validation discard-counters
interface portchannel 1
Related Commands
•

clear ipv6 dhcp snooping binding

Clear all the DHCPv6 snooping binding database entries.
Syntax clear ipv6 dhcp snooping binding
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
Example
Dell# clear ipv6 dhcp snooping?
binding
ip dhcp relay
Enable Option 82.
Syntax ip dhcp relay information-option [remote-id {port | hostname:port | mac} |
circuit-d {port | hostname:port | mac} | trust-downstream]
Parameters
remote-id
remote-id port
remote-id
hostname:port
560 Dynamic Host Configuration Protocol (DHCP)
show ip dhcp snooping — display the contents of the DHCP binding table.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S4810, S4820T, S6000, S6000-ON, and Z-Series.
Clear the snooping binding database
Enter the keyword remote-id to configure the system to enable the remote-id string in
option-82.
Enter the keywords remote-id port to configure the port as the remote id in option–
82.
Enter the keywords remote-id hostname:port to configure the format of the
hostname and port attributes.