Clear Ip Dhcp Snooping - Dell S6000 Reference Manual

Related arp inspection
Commands

clear ip dhcp snooping

Clear the DHCP binding table.
S6000
Syntax
clear ip dhcp snooping binding
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0
Version 8.2.1.0
Related show ip dhcp snooping
Commands
ip dhcp snooping
Enable DHCP snooping globally.
S6000
Syntax
[no] ip dhcp snooping
Defaults Disabled
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Dynamic Host Configuration Protocol (DHCP)
— enables dynamic ARP inspection on a VLAN.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series and S-Series.
— displays the contents of the DHCP binding table.
Introduced on the S6000.
539