4
Parts Replacement and Cleaning > Disassembly/Assembly - Laser Control System - > Removing the Main Drive Unit
Removing the Main Drive Unit
Preparation
1) Remove the all Drum Units.
2) Remove the ITB Unit.
3) Turn OFF the power.
4) Remove the Rear Cover.
5) Remove the Waste Toner Container.
Procedure
1) Close the Right Door.
2) Remove the Waste Toner Box.
• 1 Connector
• 2 Screws
x2
4
Parts Replacement and Cleaning > Disassembly/Assembly - Laser Control System - > Removing the Main Drive Unit
3) Remove the Developing High Voltage Box.
• 6 Connectors
• 3 Screws
4) Remove the Developing High Voltage Box Support Plate.
• 1 Screw
F-4-52
x6
x3
4-47
F-4-53
F-4-54
4-47