Show Diffserv; Show Dot1X; Show Interfaces - NETGEAR FSM726v2 - 10/100 Mbps Managed Switch Setup Manual

700 Series Software Manual v2.1

Show DiffServ

Use the show
diffserv
Syntax
FSM726# show diffserv
An example of the partial output is shown below.
DSCP Priority
==== ========
0 normal
1 normal
2 normal
3 normal
4 normal
5 normal
6 normal

Show Dot1x

Use the show
dot1x
Reauthentication Timer value.
Each port is listed with the 802.1x state, which can be forced authorized, forced unauthorized
(deny client to access network), or auto detected. The Reauthentication Timer value specifies the
time interval between the authentication server's checks of users connected to the network. The
default time interval is 3600 seconds.

Show Interfaces

The
show interface
other port-related information.
Syntax
6-4
command to view the priority associated with each DSCP value.
command to show the authentication server IP, shared secret, and the
command displays such information as port statistics, duplex, speed, and
Command Line Interface