Show Captive-Portal User - NETGEAR M6100 Series Reference Manual

unlimited transmission. The user-id variable is the ID of a user configured in the local
database, and is a number in the range of 1 to 128.
Default 0
Format
user user-id max-total-octets octets
Mode Captive Portal Config
Parameter Description
user-id User ID from 1 to 128 characters.
octets Number of bytes.
no user max-total-octets
Use this command to set to the default the number of octets in bytes that the user is allowed
to transmit and receive. The user-id variable is the ID of a user configured in the local
database, and is a number in the range of 1 to 128.
Format
no user user-id max-total-octets
Mode Captive Portal Config

show captive-portal user

This command displays all configured users or a specific user in the captive portal local user
database. Enter the optional user ID to view information about the specified user. The
optional user-id variable is the ID of a user configured in the local database, and is a
number in the range of 1 to 128. Enter the group keyword or the group keyword and
group-id variable to view the user information organized by groups.
Format
show captive-portal user [user-id] [group [group-id]]
Mode Privileged EXEC
Field Description
User ID Displays the ID of the user.
User Name Displays the user name.
Session Timeout Displays the number of seconds the user can remain in a session before being disconnected from
the Captive Portal.
Idle Timeout Displays the number of seconds the user can remain idle before being disconnected from the
Captive Portal.
Group ID Displays the group identifier for the group to which the user belongs.
When you include the [user-id] variable, the following information also displays:
M6100 Series Switches
Captive Portal Commands
795