Use The Netgear Insight Mobile App To Discover The Switch; About The User Interfaces - NETGEAR S350 Series User Manual

S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
10. To access the local browser interface of the switch, click the ADMIN PAGE button.
The login page of the local browser interface opens.
11. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
Use the NETGEAR Insight Mobile App to Discover the
Switch
If the switch is connected to a WiFi router or access point, the NETGEAR Insight mobile app
lets you discover the switch in your network.

To use the NETGEAR Insight mobile app to discover the switch in your network:
1. On your iOS or Android mobile device, go to the app store, search for NETGEAR
Insight, and download and install the app.
2. Connect your mobile device to the WiFi network of the WiFi router or access point to which
the switch is connected.
3. Open the NETGEAR Insight mobile app.
4. Select LOG IN to log in to your existing NETGEAR account or tap the CREATE NETGEAR
ACCOUNT button to create a new account.
After you log in to your account, the IP address of the switch displays in the device list.
5. Write down the IP address for future use.

About the User Interfaces

The switch software includes a set of comprehensive management functions for configuring
and monitoring the system by using one of the following methods:
• Local browser interface (which used to be referred to as the web interface)
• Simple Network Management Protocol (SNMP)
Each of the standards-based management methods allows you to configure and monitor the
components of the switch software. The method you use to manage the system depends on
your network size and requirements, and on your preference.
This manual describes how to use the local browser interface to manage and monitor the
system.
Get Started
18