Show Captive-Portal Status - NETGEAR GSM7228PS Cli Manual

Term Definition
The administrative mode is enabled or disabled.
Administrative
Mode
The Operational status is enabled or disabled.
Operational Status
If the operational status is disabled. This field shows the reason why the operational is
Disable Reason
disabled.
CP IP Address It is the captive portal server IP address.
Example
(switch)#show captive-portal
Administrative Mode....................... Disabled
Operational Status........................ Disabled
Disable Reason............................ Administrator Disabled
CP IP Address................. 1.2.3.4

show captive-portal status

Use this command to report the status of all captive portal instances in the system.
Format
show captive-portal status
Mode Privileged EXEC mode
Term Definition
Additional HTTP The additional HTTP port for captive portal to monitor. Captive portal only monitors
Port
port 80 by default.
The additional HTTPs port for captive portal to monitor. Captive portal only monitors
Additional HTTP
Secure Port
port 443 by default.
Peer Switch Statistics Reporting Interval
Authentication The timeout for the authentication page to be served again.
Timeout
Supported Captive The maximum number of captive portal instances supported by switch. It supports up
Portals
to 10 instances.
The number of created captive portal instances.
Configured Captive
Portals
Captive Portal Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
12-4