Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
10.1.5 snmp-server community mode
This command activates an SNMP community. If a community is enabled, an SNMP
manager associated with this community manages the switch according to its access right.
If the community is disabled, no SNMP requests using this community are accepted. In
this case the SNMP manager associated with this community cannot manage the switch
until the Status is changed back to Enable.
Default
Format
Mode
10.1.5.1 no snmp-server community mode
This command deactivates an SNMP community. If the community is disabled, no SNMP
requests using this community are accepted. In this case the SNMP manager associated
with this community cannot manage the switch until the Status is changed back to Enable.
Format
Mode
10.1.6 snmp-server community ro
This command restricts access to switch information. The access mode is read-only (also
called public).
Format
Mode
10.1.7 snmp-server community rw
This command restricts access to switch information. The access mode is read/write (also
called private).
Format
Mode
10-4
private and public communities - enabled; other four - dis-
abled
snmp-server community mode <name>
Global Config
no snmp-server community mode <name>
Global Config
snmp-server community ro <name>
Global Config
snmp-server community rw <name>
Global Config
v1.0, December 2005
SNMP Commands