Show Vlan Brief; Show Vlan Port - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

show vlan brief

This command displays a list of all configured VLANs.
Format
Mode
VLAN ID
VLAN Name
VLAN Type

show vlan port

This command displays VLAN port information.
Format
Mode
slot/port
Port VLAN ID
Acceptable Frame Types Specifies the types of frames that may be received on this port.
Switching Commands
Tagged - specifies to transmit traffic for this VLAN as tagged
frames.
Untagged - specifies to transmit traffic for this VLAN as
untagged frames.
show vlan brief
Privileged EXEC and User EXEC
There is a VLAN Identifier (vlanid) associated with each VLAN.
The range of the VLAN ID is 1 to 4094.
A string associated with this VLAN as a convenience. It can be
up to 16 alphanumeric characters long, including blanks. The
default is blank. VLAN ID 1 always has a name of `Default`. This
field is optional.
Type of VLAN, which can be Default, (VLAN ID = 1), a static
(one that is configured and permanently defined), or a Dynamic
(one that is created by GVRP registration).
show vlan port {<slot/port> | all}
Privileged EXEC and User EXEC
Indicates by slot id and port number which port is controlled by
the fields on this line. It is possible to set the parameters for all
ports by using the selectors on the top line.
The VLAN ID that this port will assign to untagged frames or pri-
ority tagged frames received on this port. The value must be for
an existing VLAN. The factory default is 1.
The options are 'VLAN only' and 'Admit All'. When set to
'VLAN only', untagged frames or priority tagged frames received
on this port are discarded. When set to 'Admit All', untagged
December 2004, 202-10010-02
8-63