logging persistent
Use this command to configure the Persistent logging for the switch. The severity level of logging
messages is specified at severity level. Possible values for severity level are (emergency|0,
alert|1, critical|2, error|3, warning|4, notice|5, info|6,
debug|7).
Default
Disable
Format
logging persistent <severity level>
Mode
Global Config
no logging persistent
Use this command to disable the persistent logging in the switch.
Format
no logging persistent
Mode
Global Config
System Utility and Clear Commands
This section describes the commands you use to help troubleshoot connectivity issues and to
restore various configurations to their factory defaults.
Utility Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
9-24