spanning-tree forward-time
This command sets the Bridge Forward Delay parameter to a new value for the common and
internal spanning tree. The forward-time value is in seconds within a range of 4 to 30, with the
value being greater than or equal to "(Bridge Max Age / 2) + 1".
Default
15
Format
spanning-tree forward-time <4-30>
Mode
Global Config
no spanning-tree forward-time
This command sets the Bridge Forward Delay parameter for the common and internal
spanning tree to the default value.
Format
no spanning-tree forward-time
Mode
Global Config
spanning-tree guard
This command selects whether loop guard or root guard is enabled on an interface. If neither
is enabled, then the port operates in accordance with the multiple spanning tree protocol.
Default
none
Format
spanning-tree guard { none | root | loop }
Mode
Interface Config
no spanning-tree guard
This command disables loop guard or root guard on the interface.
Format
no spanning-tree guard
Mode
Interface Config
spanning-tree tcnguard
This command enables the propagation of received topology change notifications and topology
changes to other ports.
Default
disable
Format
spanning-tree tcnguard
Mode
Interface Config
ProSafe Managed Switch
Switching Commands
50