Show Ip Dvmrp Interface - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual
Prosafe 7300 series layer-3 switches, software version 4.0
Hide thumbs
Also See for ProSafe GSM7324:
- Reference manual (263 pages) ,
- Installation manual (26 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Reachable
Routes
The following
fields are
displayed for each
interface.
Interface
Interface Mode
State
15.2.6 show ip dvmrp interface
This command displays the interface information for DVMRP on the specified interface.
Format
Modes
Interface Mode
Metric
Local Address
Generation ID
The following fields are displayed only if DVMRP is enabled on this interface.
Received Bad
Packets
Received Bad
Routes
Sent Routes
15-14
The number of entries in the routing table with non-infinite
metrics.
Valid slot and port number separated by forward slashes.
The mode of this interface. Possible values are Enabled and
Disabled.
The current state of DVMRP on this interface. Possible val-
ues are Operational or Non-Operational.
show ip dvmrp interface <slot/port>
Privileged EXEC
User EXEC
This field indicates whether DVMRP is enabled or disabled
on the specified interface.
The metric of this interface. This is a configured value.
The IP Address of the interface.
This Field is displayed only when DVMRP is operational on
the interface.
The Generation ID value for the interface. This is used by the
neighboring routers to detect that the DVMRP table should
be resent.
The number of invalid packets received.
The number of invalid routes received.
The number of routes that have been sent on this interface.
v1.0, December 2005
IP Multicast Commands
Advertisement
Chapters
Table of Contents
