Show Classofservice Ip-Precedence Mapping - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch Software Administration Manual
7000 series managed switch administration guide for software version 8.0.3
Hide thumbs
Also See for GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch:
- User manual (628 pages) ,
- Cli manual (788 pages) ,
- Hardware installation manual (39 pages)
Table of Contents
Advertisement
ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
Show classofservice ip-precedence Mapping
The example is shown as CLI commands and as a Web interface procedure.
CLI: Showing classofservice ip-precedence Mapping
(Netgear Switch) #show classofservice ip-precedence-mapping
IP Precedence
Traffic Class
-------------
-------------
0
1
2
3
4
5
6
7
Web Interface: Showing classofservice ip-precedence Mapping
To use the Web interface to show CoS trust mode, proceed as follows:
1.
From the main menu, select QoS > Advanced >IP Precedence Queue Mapping. A screen similar to the
following displays.
Figure 10-3
2.
Select the All in the Interface field.
3. The global IP precedence to Queue mapping is displayed.
4. Select the specific interface(e.g. 1/0/1) in the Interface field.
Class of Service (CoS) Queuing
1
0
0
1
2
2
3
3
v1.0, June 2010
10-5
Advertisement
Table of Contents
