Isdp Commands; Show Mac-Address-Table Stats; Isdp Run - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

show mac-address-table stats

This command displays the Multicast Forwarding Database (MFDB) statistics.
Format
show mac-address-table stats
Mode Privileged EXEC
Term Definition
Max MFDB The total number of entries that can possibly be in the Multicast Forwarding Database
Table Entries
table.
Most MFDB The largest number of entries that have been present in the Multicast Forwarding
Entries Since
Database table. This value is also known as the MFDB high-water mark.
Last Reset
Current Entries The current number of entries in the MFDB.

ISDP Commands

This section describes the commands you use to configure the industry standard Discovery
Protocol (ISDP).

isdp run

This command enables ISDP on the switch.
Default Enabled
Format
isdp run
Mode Global Config
no isdp run
This command disables ISDP on the switch.
Format
no isdp run
Mode Global Config
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-206