Manage The Dos Prevention Mode; Manage The Power Saving Mode - NETGEAR GS316EP User Manual

8. To remove more IP addresses, repeat steps 6 and 7.
CAUTION: If you remove all IP addresses, all access restrictions are removed and
any IP address can access the device UI of the switch.

Manage the DoS prevention mode

You can enable the Denial of Service (DoS) prevention mode so that the switch
automatically blocks malicious packets. By default, this mode is disabled.
To manage the DoS prevention mode:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select SETTINGS.
5. From the menu on the left, select DOS PREVENTION.
The DOS PREVENTION page displays.
6. Enable or disable the DoS prevention mode by clicking the button.
When the DoS prevention mode is enabled, the button bar displays green.
7. Click the APPLY button.
Your settings are saved.

Manage the power saving mode

The power saving mode enables the IEEE 802.3az Energy Efficient Ethernet (EEE)
function, cable length power saving, and link-up and link-down power saving:
• IEEE 802.3az: Combines the Energy Efficient Ethernet (EEE) 802.3 MAC sublayer
with the 100BASE-TX, 1000BASE-T, and 10GBASE-T physical layers to support
operation in Low Power Idle (LPI) mode. When LPI mode is enabled, systems on
Maintain and Monitor the Switch
Gigabit Ethernet Plus Switches
83 User Manual