Show Security-Profile - Extreme Networks ExtremeWare Command Reference Manual

show security-profile

show security-profile {<name>}
Description
Displays the configured parameters of the security profile.
Syntax Description
name Specifies the name of an existing security profile whose parameters need to be displayed.
Default
All
Usage Guidelines
Use this command to show security profiles currently configured on the platform and all values
associated with each security profile. If no security profile name is entered, configuration parameters
are displayed for all security profiles.
Examples
The following command displays the security profile configuration for all profiles:
show security-profile
The output of the command is similar to:
Dot11 Authentication:open
Network Authentication:none
Use Dynamic VLAN:yes
SSID in Beacon:on
ExtremeWare 7.7 Command Reference Guide
Profile Name:Unsecure
ESS Name:fz-unsecure
Encryption:none
User VLAN:Default
Interfaces:180
1:1:2, 1:2:2, 1:3:2, 1:4:1, 1:4:2,
1:4:2, 1:5:1, 1:5:2, 1:5:2, 1:6:1,
1:6:2, 1:6:2, 1:7:1, 1:7:2, 1:7:2,
1:8:1, 1:8:2, 1:8:2, 1:9:1, 1:9:2,
1:9:2, 1:10:1, 1:10:2, 1:10:2, 1:11:1,
1:11:2, 1:11:2, 1:12:1, 1:12:2, 1:12:2,
1:13:1, 1:13:2, 1:13:2, 1:14:1, 1:14:2,
1:14:2, 1:15:1, 1:15:2, 1:15:2, 1:16:1,
1:16:2, 1:16:2, 1:17:1, 1:17:2, 1:17:2,
1:18:1, 1:18:2, 1:18:2, 1:19:1, 1:19:2,
1:19:2, 1:20:1, 1:20:2, 1:20:2, 1:21:1,
1:21:2, 1:21:2, 1:22:1, 1:22:2, 1:22:2,
1:23:1, 1:23:2, 1:23:2, 1:24:1, 1:24:2,
1:24:2, 1:25:1, 1:25:2, 1:25:2, 1:26:1,
show security-profile
1089