Show Udp-Profile - Extreme Networks ExtremeWare XOS Command Reference Manual

show udp-profile

show udp-profile {vlan <vlan-name> | {policy} <policy-name>}
Description
Displays UDP forwarding profiles.
Syntax Description
vlan-name
policy-name
Default
If no VLAN or policy is specified, all configured profiles will be displayed.
Usage Guidelines
UDP profiles can also be displayed by using the policy manager command
. However, the format of the policy display will be different than this command
name> | detail}
Example
The following command displays all the configured UDP forwarding profiles on the switch:
show udp-profile
The following is sample output:
UDP Profile Name: move_to7
Number of datagram forwarded: 181
Dest UDP Port: 67 Fwd to IP Addr: 20.0.0.5
Dest UDP Port: 67 Fwd to VLAN: to7
Applied to incoming traffic on VLANS:
to-mariner
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies a VLAN.
Specifies a UDP forwarding profile.
show udp-profile
show policy {<policy-
1153