Installing The T320 Mounting Hardware For A Four-Post Rack Or Cabinet; Figure 37: Installing The Mounting Hardware For An Open-Frame Rack - Juniper Core Router T Series Hardware Manual
Hide thumbs
Also See for Core Router T Series:
- Monitoring and troubleshooting manual (812 pages) ,
- Handling instructions manual (12 pages)
Table of Contents
Advertisement
Related
Documentation
Installing the T320 Mounting Hardware for a Four-Post Rack or Cabinet
Copyright © 2018, Juniper Networks, Inc.
Figure 37: Installing the Mounting Hardware for an Open-Frame Rack
T320 Chassis Description on page 13
T320 Site Preparation Checklist Requirements on page 89
T320 Clearance Requirements for Airflow and Hardware Maintenance on page 91
To prepare to install the T320 router into a four-post rack or cabinet:
Install cage nuts, if needed.
Install the large mounting shelf and spacer bars on the front rail.
Install the small mounting shelf on the rear rail.
Remove the center-mounting brackets from the chassis.
Chapter 15: Installing the Mounting Hardware
117
Advertisement
Table of Contents
Troubleshooting
