Chapter 6 Installing The M120 Router With A Lift; Tools Required To Install The M120 Router Using A Mechanical Lift; Installing The M120 Router Using A Mechanical Lift - Juniper Networks Hardware Manual

CHAPTER 6
Installing the M120 Router with a Lift

Tools Required to Install the M120 Router Using a Mechanical Lift

Related
Documentation

Installing the M120 Router Using a Mechanical Lift

Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com
Tools Required to Install the M120 Router Using a Mechanical Lift on page 55
Installing the M120 Router Using a Mechanical Lift on page 55
To install the router, you need the following tools:
Mechanical lift
Phillips (+) screwdrivers, number 2
M120 Router Chassis Description on page 6
M120 Router Installation Summary on page 43
M120 Chassis Lifting Guidelines on page 195
General Safety Warnings for M Series, MX Series, and T Series Routers on page 190
Because of the router's size and weight—up to 225 lb (102.1 kg) depending on the
configuration—we strongly recommend you install the router using a mechanical lift. If
you do not use a lift to install the router, refer to "Installing the M120 Router Without
Using a Mechanical Lift" on page 69 for complete instructions to safely install the router.
Before installing the router:
Read the safety information in "M120 Chassis Lifting Guidelines" on page 195.
1.
Prepare your site and review the guidelines in "M120 Site Preparation Checklist" on
2.
page 37.
Remove the router from the shipping container as described in "Unpacking the M120
3.
Router" on page 44.
Install the mounting hardware as described in "Installing the Mounting Hardware for
4.
a Front-Mount Four-Post Rack or Cabinet" on page 49, "Installing the Mounting
Hardware for a Front-Mount Open-Frame Rack" on page 51, or "Installing the Mounting
Hardware for a Center-Mount Open-Frame Rack" on page 53.
55