Table of Contents
Advertisement
12.2.9.8
dns-server
Use this command to assign one or more DNS servers to DHCP clients.
dns-server address [address2...address8]
Syntax Description
address
address2...
address8
Command Syntax of the "no" Form
The "no" form of this command deletes the DNS server list:
no dns-server
Command Type
Router command.
Command Mode
Any DHCP configuration mode.
Command Defaults
If address2...address8 is not specified, no additional addresses will be configured.
Example
This example shows how to assign a DNS server at 11.12.1.99 to the "localpool" address pool:
Matrix>Router1(config)#ip dhcp pool localpool
Matrix>Router1(config-dhcp-pool)#dns-server 11.12.1.99
Configuring Dynamic Host Configuration Protocol (DHCP)
Specifies the IP address of a DNS server.
(Optional) Specifies, in order of preference, up to 7
additional DNS server IP address(es).
Matrix DFE-Platinum and Diamond Series Configuration Guide
IP Configuration Command Set
12-123
Hide quick links:
Advertisement
Chapters
Table of Contents
