Enterasys Matrix 2G4072-52 Configuration Manual page 1105

Table 13-1 RIP Configuration Task List and Commands (Continued)
To do this...
Specify a RIP version.
Configure RIP authentication.
Disable automatic route summarization
(necessary for enabling CIDR)
Disable triggered updates.
Disable or re-enable split horizon
poison-reverse.
Control the processing of routing updates.
Enable redistribution from non-RIP
routes.
Use these commands...
ip rip send version
ip rip receive version
key chain
key (Section
key-string
accept-lifetime
send-lifetime
ip rip authentication keychain
ip rip authentication mode
no auto-summary
ip rip disable-triggered-updates
ip split-horizon poison
passive-interface
receive interface
distribute-list
redistribute
Matrix DFE-Platinum and Diamond Series Configuration Guide
Routing Protocol Configuration Command Set
(Section 13.2.2.7)
(Section
(Section 13.2.2.9)
13.2.2.10)
(Section 13.2.2.11)
(Section 13.2.2.12)
(Section 13.2.2.13)
(Section
(Section 13.2.2.16)
(Section
(Section 13.2.2.19)
(Section 13.2.2.20)
(Section 13.2.2.21)
(Section 13.2.2.22)
Configuring RIP
13.2.2.8)
(Section 13.2.2.14)
13.2.2.15)
(Section 13.2.2.17)
13.2.2.18)
13-3