Table of Contents
Advertisement
Setting item
Output
Coordinates
2
Calibration
Reflect to
overall
judgement
Key Points for Test Measurement and Adjustment (Gravity and Area)
The following content is displayed in the "Detail result" area as text.
Judge
Area
Gravity X
Gravity Y
Key Points for Adjustment
Select the adjustment method referring to the following points.
When the measurement results are unstable
For color cameras:
Parameter to
be adjusted
Color
For monochrome cameras:
Color
Measurement Results for Which Output Is Possible (Gravity and Area)
The following values can be output using processing items related to results output.It is also possible to
reference measurement values from expressions and other processing units.
170
Gravity and Area
Set value
[Factory
default]
[After
●
As measurement results, select whether to output coordinate values
scroll]
to external devices before or after the position deflection correction is
Before
●
applied.
scroll
Select whether to reflect the calibration in the values output to the
[OFF]
external device as measurement results.
●
ON
ON: Output the coordinates converted into actual dimensions.
●
OFF: Output the camera coordinate values.
[ON]
Enables choosing whether or not the judgement result of this
●
OFF
processing unit is reflected in the scene overall judgement.
●
Displayed items
Tap the area whose color will be sampled and the area whose color will not be sampled. The setup
should be such that two stable sections of hue, saturation and brightness are formed.
Parameter to be adjusted
Description
Description
Judgement result
Area
Gravity X
Gravity Y
Remedy
Remedy
Adjust the binary level.
FZ3 Processing Items List Manual
Advertisement
Table of Contents
