Data Logging
This is used to save measurement data in storage or USB memory.
Used in the Following Case
When performing analysis using measurement data
●
Important
Insert data logging as close to the end of the flow as possible.If "Only NG" is selected in logging timing
●
conditions and an NG occurs after the data logging processing unit, it will not be logged.
Setting data logging settings to save [Image logging] makes simultaneous confirmation of measurement data
●
and image data convenient.
Reference:
"User's Manual", "Setting Logging Conditions [Logging setting]" (p.98)
Settings (Data Logging)
Indicate the data to perform logging for.Logging can be performed for up to 8 data using one "Data
logging" processing item.
Note
If you want to perform logging for 9 or more data using one record
●
Reference:
Additional Explanation (Data Logging) (p.384)
1.
In the Item Tab area, tap [Setting].
FZ3 Processing Items List Manual
Data Logging
381
4