Setting item
Exclude this
color
2
Background
color
Image type
Binarization (Labeling)
When a monochrome camera is connected, the 256-tone grayscale images taken in from the camera
are converted into binary black-and-white images before the images are measured.Converted white
pixels are measured.
This specifies the level for converting grayscale images into binary images.
1.
In the Item Tab area, tap [Binary].
2.
In the "Binary setting" area, specify the reference density range.
Binary level
176
Labeling
Set value
[Factory default]
If you place a check at this option, pixels within the HSV range
are excluded from color extraction.The priority order for
Checked
●
exclusion is that the higher color extraction range numbers are
[Unchecked]
●
given priority.This setting is disabled if "More ranges of color
extraction" is unchecked.
[Black]
●
White
●
The background section outside the extracted image is filled with
Red
●
the specified colors.
Green
●
Blue
●
Measurement
●
image
[All color
●
image]
This sets the state of the image to display.
Selection
●
color image
Binary image
●
Set value
Item
[Factory default]
0 to 255
Upper limit
[255]
0 to 255
Lower limit
[128]
Description
Description
Specify the level for converting 256-tone
grayscale images to binary images.Adjust the
binary level so that the measurement object is
converted to white pixels.You can also set the
binary level so that only intermediate density is
measured.
FZ3 Processing Items List Manual