Table of Contents
Advertisement
Note
When the region is a circumference or arc, you can display the graph enlarged in the vertical
●
direction.Place a check at "Zoom" and tap the button to adjust.
2
2.
If necessary, specify a value for each item in the "Measurement condition" area.
For color cameras:
Setting item
Edge No.
Edge level
Edge color
level
120
Edge Position
Set value
[factory default]
Specify the edge number used to extract edges.
Edge numbers are assigned to detected edges starting from
0 to 99
0 and going on in the direction from the start point (the arrow
[0]
point) to the end point (the direction of arrow) in the selected
area.
Position (%) for
●
width of a color
Select a color difference level with which the edge is detected.
0 to 100 [50]
Reference: See "User's Manual", "Edge Detection
Value of color
Measurement" (p.304)
●
0 to 442 [20]
0 to 442
This emphasis level can be specified only if the edge color
[100]
to detect is specified.
Description
FZ3 Processing Items List Manual
Advertisement
Table of Contents
