Table of Contents
Advertisement
Setting item
Upper limit
Binary level
Lower limit
Auto setting
Reverse
When Dyn threshold is selected
Set value
Setting item
[Factory default]
0 to 127
Offset value
[5]
Checked
●
Reverse
[Unchecked]
●
Perform the [Detail setting] if required.
FZ3 Processing Items List Manual
Set value
[Factory default]
0 to 255
Specify the level for converting 256-tone
[255]
grayscale images to binary images.Adjust the
binary level so that the measurement object is
converted to white pixels.You can also set the
0 to 255
binary level so that only intermediate density is
[128]
measured.
Optimum binary levels are calculated
—
automatically and set.
Checked
●
This item reverses black and white colors.
[Unchecked]
●
This sets the offset for the difference between the input image
and that input image after it has been subject to brightness
averaging.The higher this value, the easier it is to extract
locations (such as edges) with large density difference.
This item reverses black and white colors.
Description
Description
Labeling+
2
195
Advertisement
Table of Contents
