Reference Position (Ec Circle Search) - Omron XPECTIA FZ3 User Manual

Reference Position (EC Circle Search)

When the circle size is registered, this position is automatically set at the same time as the reference
position.
This item can be used to change the reference position to any desired position.This is handy for
measuring the positional deviation from a certain position.
For the reference position, see Reference:
1.
In the Item Tab area, tap [Ref. position].
In the Image Display area, the current reference position will be displayed as the crosshair
cursor.
2.
Tap the position to be set as the reference position.
3.
If necessary, finely adjust with numeric input and the arrow buttons.
To remeasure on the displayed image and set the reference position, tap [Measure ref.].
FZ3 Processing Items List Manual
"User's Manual", "Terminology Explanations" (p.309) .
EC Circle Search 87
2