3.
Specify the camera gain while checking the image.
1
Item
Gain
Frame/Field - for Monochrome Cameras Only
There are two methods to transfer one image from a camera to the controller: frame read and field read.
Frame read is to read all of the scanned lines of the image. The result is called a frame image. Field read
is used to read half of the interlaced scanned lines of the image. The result is called the field image.
Here, select the unit to be treated as one image.
1.
In the Item Tab area, tap [Camera setting].
2.
In the "Frame/Field" area, select either "Frame" or "Field".
16
Camera Image Input
Set value
[Factory default]
0 to 230
[50]
(For FZ-SFx, FZ-SPx,
FZ-SC2M/FZ-S2M, FZ-SC5M/
FZ-S5M)
[85]
(for FZ-Sx, FZ-SLC, FZ-SZC)
Description
Adjust the camera gain when the shutter speed, the
lens aperture, and lighting conditions cannot be
used to brighten the image. Usually, the factory
default value can be used.
FZ3 Processing Items List Manual