Reference Position (Gravity And Area) - Omron XPECTIA FZ3 User Manual

For monochrome cameras:
2
Setting item
Binary image

Reference Position (Gravity and Area)

When the measurement region is set, the center of gravity is automatically set at the same time as the
reference position.This item is used to change the reference position to any desired position.This is
handy for measuring the positional deviation from a certain position.In the same way for the reference
area, when the region settings are made, they are set automatically based on the measurement region.
1.
In the Item Tab area, tap [Ref. position].
In the Image Display area, the current reference position will be displayed as the crosshair
cursor.
2.
Tap the position to be set as the reference position.
Note
Displaying the image enlarged makes this tapping easier.
●
Reference:
3.
If necessary, finely adjust with numeric input and the arrow buttons.
4.
If necessary, in the "Display setting" area, set up display settings for the images displayed in the
Image Display area.
166 Gravity and Area
Set value
[factory default]
[Checked]
●
Unchecked
●
"Using the Zoom Function" in the "User's Manual" (p.317)
Description
The image is displayed in binary with black and
white.
FZ3 Processing Items List Manual