Fz3 Processing Items List Manual; Dictionary Parameters (Character Inspection) - Omron XPECTIA FZ3 User Manual

List of Character Inspection Items
Item name
This item specifies the processing unit number for the model dictionary to use for character
Dictionary recognition.
Reference:
This item is used to set up the measurement area.
Region Instead of measuring the entire input image, narrowing the measurement area shortens the
setting processing time.
Reference:
This item specifies the judgement condition for measurement results.Specify the criteria to judge the
Measurement measurement result if the X and Y coordinates and the correlation with the model are OK.
Reference:
This item can be changed if necessary.Normally, the factory default value will be used.
Output
Use the output parameter to specify how to handle the coordinates.
parameter
Reference:

Dictionary Parameters (Character Inspection)

This item selects the processing unit number for the model dictionary to use for character inspection.
1.
In the Item Tab area, tap [Dictionary].
2.
In the "Dictionary unit" area, select the unit number.
3.
If necessary, specify an index to use.
1.
Tap [ ] and select the dictionary unit to be specified.
The following character strings are registered.

FZ3 Processing Items List Manual

Dictionary Parameters (Character Inspection) (p.237)
Region Setting (Character Inspection) (p.238)
Measurement Parameters (Character Inspection) (p.238)
Output Parameters (Character Inspection) (p.240)
Description
Character Inspection
2
237