Table of Contents
Advertisement
2
Setting item
Mask size
Edge level
Region Setting (EC Circle Search)
Specify the rectangular area in which to search for the circle.
Instead of measuring the entire input image, narrowing the measurement area shortens the processing
time.
1.
In the Item Tab area, tap [Region setting].
2.
Tap [Edit].
The figure setting area is displayed.
3.
Specify the area in which to search for the model.
The rectangle covering the entire screen is set. Adjust the size and position of the rectangle.
4.
Tap [OK].
The measurement region is registered and displayed in the Image Display area.
86
EC Circle Search
Set value
[factory
default]
3x3
●
[5x5]
Select the range of pixels which are used to extract the edge.
●
7x7
With a larger mask size, search is less affected by variation in pixels.
●
9x9
●
Adjust the edge extraction level when the edge is hard to see due to
0 to 255
low contrast with the background or when unnecessary background
[100]
noise should be removed.
Description
FZ3 Processing Items List Manual
Advertisement
Table of Contents
