Set value
Setting item
[Factory default]
Filling up
Checked
●
holes
[Unchecked]
●
Outside
Checked
●
trimming
[Unchecked]
●
3.
If necessary, set the conditions for extraction as a label.
FZ3 Processing Items List Manual
Description
Select the process method for the part encircled by the
designated color circle.
When checked, the hole is processed as having the specified
color.
This option can be used only when there is a section of the
designated color in the measurement region that does not need
to be measured.
When "Checked" is set, the whole area outside of the
measurement region is extracted as having the specified color.
Labeling+
199
2