Region Setting (Gravity and Area)
This item is used to set up the measurement area.It is possible to measure the entire input image, but
restricting the range enables accurate measurement in a short period of time.
Use a rectangle, circle (ellipse), circumference, or polygon to specify a measurement region for [Gravity
and Area].Up to 8 figures can be combined to draw the measurement region.
1.
In the Item Tab area, tap [Region setting].
2.
Use the Drawing tools to specify the measurement region.
3.
In the figure setting area, tap [OK].
The measurement region is registered and displayed in the Image Display area.
4.
If necessary, in the "Display setting" area, set up display settings for the images displayed in the
Image Display area.
For color cameras:
Setting item
Extracted
●
image
●
FZ3 Processing Items List Manual
Set value
[factory default]
[Checked]
If you place a check at this option, images set with color
Unchecked
specification are displayed.
Description
Gravity and Area
2
165