Table of Contents
Advertisement
List of Barcode+ Items
Item name
Region
setting
2
Measurement
Results
settings
Output
parameter
Region Setting (Barcode+)
Specify the rectangular area in which to search for the barcodes.
Restricting the measurement area can shorten the processing time.
1.
In the Item Tab area, tap [Region setting].
2.
Tap [Edit].
The figure setting area is displayed.
3.
Specify the area in which to search for the barcodes.
The rectangle covering the entire screen is set. Adjust the size and position of the rectangle.
4.
Tap [OK].
The area to measure is registered.
Important
Set the region such that the number of pixels in the measurement region is 1920000 pixels or less.
●
Set the measurement region such that it contains only 1 barcode.
●
If there is more than one bar code in the measurement region, measurement may not be performed correctly.
Measurement Parameters (Barcodes+)
This item sets the judgement conditions for measurement conditions and measurement results.
When the Teaching button is pressed, the code type and advanced settings are set automatically.
If you then tap the Measure button, measurement is executed, the detected barcode region is displayed
on the image and the measurement results are displayed as measurement value of the judgement
condition.
If measurement cannot be carried out successfully with this procedure, adjust the parameters shown
below.
1.
In the item tab area, tap [Measurement].
262
Barcode+
This item is used to set up the measurement area.
Restricting the measurement area can shorten the processing time.
Reference:
Region Setting (Barcode+) (p.262)
This item specifies the judgement condition for measurement results.Set the code type and the
number of characters to be judged as OK.
Reference:
Measurement Parameters (Barcode+) (p.262)
Set the measurement results.Judgement results can be classified.
Reference:
Results Settings (Barcode+) (p.265)
This item can be changed if necessary.Normally, the factory default value will be used.
Reference:
Output Parameters (Barcode+) (p.265)
Description
FZ3 Processing Items List Manual
Advertisement
Table of Contents
