Table of Contents
Advertisement
Setting item
3
Method
With rotation
Source
image
Interpolation
[Note 1] Reference: Processing Units That Can Be Combined with Position Compensation (p.282)
When you choose the "Calculation" option
3.
Using expressions, specify the "Reference" and "Position" which are used to determine the
position compensation.
Differences between the respective values in the "Reference" and "Position" areas give the
amount of position compensation to be performed.
284
Position Compensation
Set value
[Factory default]
This performs a position compensation by referring to the
coordinates measured with the search processing unit or
edge position processing unit
[Position Compensation] (automatic processing unit).
[1 unit scroll]
This moves the image by the difference between the
measured coordinates and the reference coordinates of the
referring search processing unit or edge position processing
unit.
This performs a position compensation by referring to the
coordinates measured with the search processing unit or
2 unit scroll
edge position processing unit
two units before the [Position Compensation] (automatic
processing unit).
Set whichever position compensation you prefer.Set the
Calculation
reference coordinates and measurement coordinates.
The image for the immediately preceding image input
(Camera image input/Camera switching) is displayed.When
position compensation has been performed, the status
Reset scroll
returns to that from before position compensation.
If Filtering or Color Gray Filter had been performed, the
original image with Filtering or Color Gray Filter released is
displayed.
When "1 unit scroll" or "2 unit scroll" is selected as the
Checked
setting method, place a check for executing position
●
[Unchecked]
compensation in the rotation direction in addition to the XY
●
directions.
The camera input image that has not been subject to filtering
Camera image
is subject to compensation as is.
Images to which filtering and position compensation
[Prev image]
processing are applied in units even before the "Position
Compensation" being set are the targets.
[None]
Position compensation is performed in units of pixels.
This option joins more than one point with a line in order to
Bilinear
find a desired approximate value.The image will become
smoother.
Description
immediately before the
[Note 1]
immediately before or
[Note 1]
FZ3 Processing Items List Manual
Advertisement
Table of Contents
