3.
Use the drawing tools to specify the model registration range.
4.
In the figure setting area, tap [OK].
The model is registered and its center X and Y coordinate values are displayed in the "Setting
model" area.
The image specified for the model is displayed in the Image Display area.
5.
To register two or more models, repeat the Steps Reference: 2(p.54) to Reference: 4(p.55) .
Important
When a model is registered, the center of the model is registered as the detection point.A detection point is a
●
point output as a measurement value.If multiple figures are combined, the central coordinates of the
circumscribed rectangle are registered.
FZ3 Processing Items List Manual
Flexible Search
55
2