Table of Contents
Advertisement
3.
Set up the judgement condition.
2
Dictionary correlation
Character count
Verification string
Output Parameters (Character Inspection)
Specify how to treat the coordinates to be output to the external device as measurement results.
Important
After setting up the measurement parameters, changing the output parameters will cause measurement results
●
to vary accordingly.If the output parameters have been changed, re-specify the measurement, too.
1.
Tap [Output parameter] in the Item Tab area.
2.
Specify a value for each item.
240
Character Inspection
Set value
Setting item
[Factory default]
[Unchecked]
●
(Not used)
Checked
●
(Used)
0 to 100
Correlation
[60]
1 to 32
A string with up to
32 characters.
[(None)]
Description
Specify whether to use the correlation lower limit
set in the Model Dictionary or not.
When "Dictionary correlation" is unchecked,
specify the Correlation.
When "Inspection mode" is "OCR + Count",
specify the judgement condition for the number of
characters.
When "Inspection mode" is "OCV", specify the
Verification string."*" in the Verification string is a
wild card. Verification of whether a character is "*"
is not possible. For sections to be judged OK no
matter what characters are present and to just
inspect whether or not there are characters at all,
use "*".
FZ3 Processing Items List Manual
Advertisement
Table of Contents
