Setting item
-999999999.9999 to
Upper
999999999.9999
-999999999.9999 to
Lower
999999999.9999
Referred max
/ min of
[Checked]
●
indication
Unchecked
●
range
Note
If the window is entered after measurement is performed a few times and [Default] is tapped on, optimal
●
judgement conditions including maximum and minimum measurement values are automatically set.
3.
In the "Warning" area, specify values for "Upper" and "Lower".
The setup method is the same as the setup method for the "Judgement" area.
Setting item
[Factory default]
-999999999.9999 to
Upper
[999999999.9999]
[-999999999.9999] to
Lower
999999999.9999
Referred
max / min of
[Checked]
●
indication
Unchecked
●
range
Measurement History Display (Trend Monitor)
Displays measurement history.
1.
Tap [History display] in the Item Tab area.
FZ3 Processing Items List Manual
Set value
[Factory default]
Specify the range where the measurement result is
judged to be OK.
When checked, the judgement range that can be set
with the upper and lower values becomes the same as
the max. and min. values set in [Display range].
Set value
Specify the warning range for encouraging caution
before frequent occurrence of NGs.
When checked, the judgement range that can be set with
the upper and lower values becomes the same as the
max. and min. values set in [Display range].
Description
Description
Trend Monitor
4
371