Table of Contents
Advertisement
Note
The edge is scanned from the start point of the area toward the end point.
●
When setting up the measurement region, pay attention to the detection direction of the edge.
2
Measurement cannot be performed if there is no edge within the measurement region.When determining the
●
size and position of the measurement region, take into account the movement range of the measurement object.
1.
In the Item Tab area, tap [Region setting].
2.
Use the Drawing tools to specify the measurement region.
3.
In the figure setting area, tap [OK].
The measurement region is registered and displayed in the Image Display area.
Note
Use the zoom function if the measurement region is too small to identify the direction of the arrow.
●
Reference:
116
Edge Position
"Using the Zoom Function" in the "User's Manual" (p.317)
FZ3 Processing Items List Manual
Advertisement
Table of Contents
