5.
The region is divided equally.
Note
You can specify enable/disable for each divided region.Tapping a divided region displays the following
●
screen.
Edge Color Specification - For Color Cameras Only (Scan Edge Position)
This item selects the color of the edges to be detected.
If the target color changes, this setting is not necessary.If the color is not specified, positions in the
measurement region where the color changes drastically are detected as an edge.
1.
In the Item Tab area, tap [Edge color].
2.
Place a check at "Edge color specification" in the "Color setting" area.
FZ3 Processing Items List Manual
Scan Edge Position
135
2