Table of Contents
Advertisement
Inputting and Setting Values (Value Setting)
Enter calibration data directly with numerical values.
1.
In the Item Tab area, tap [Calibration].
2.
In the "Calibration setting" area, select "Parameter".
3.
In the "Parameter" area, specify values for the "Coordinate", "Origin" and "Magnification".
Set value
Item
[Factory default]
[Lefthand],
Coordinate
Righthand
FZ3 Processing Items List Manual
Description
Left-hand type: Clockwise is forward when specifying the
coordinates.
Right-hand type: Counter-clockwise is forward when specifying
the coordinates.
Camera Image Input
29
1
Advertisement
Table of Contents
